Results 1 to 4 of 4

Thread: no power

  1. #1
    Junior Member
    Join Date
    Aug 2009
    Posts
    2

    Default no power

    Washer was near end of spin cycle when it shut down and now it has no power. There is no power to the display and the rest of the machine. I check oulet and it is fine.

  2. #2
    Junior Member
    Join Date
    Oct 2009
    Posts
    1

    Smile no power to wasingmachine

    the machine went off last night no power it is pluged in and has elecrict

  3. #3
    Junior Member
    Join Date
    Aug 2009
    Posts
    2

    Default

    Your pump had a small leak and has shorted the motherboard. You will need to replace the pump and the motherboard.

  4. #4
    Senior Level Tech
    Join Date
    Jan 2009
    Posts
    457

    Default

    Quote Originally Posted by stlouisfrank View Post
    Your pump had a small leak and has shorted the motherboard. You will need to replace the pump and the motherboard.

    That may or may not be the case, you don't want to assume things like that without checking further.
    Boards can fail for different reasons.

    As mentioned, check the pump for signs of leakage, also check the thermistor seal on the mixing chamber under the control panel where the water inlet valves are located. Check to make sure water was not gotten into the machine control. If the tech sheet is all wet or looks like it was dipped in water, that's a sure sign of a leaky thermistor seal. You also should check the resistances of the inlet valve coils, the diverter valve and the pump coil.
    Thank you for allowing us to serve you!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •